Filter
Top Products
Chapter 5 Results from LogTag 61
Combining charts onto a
single chart
To overlay multiple charts in one view, select the Multi Chart ( ) command. All charts
that are currently open will be displayed together. Additional files opened while in Multi
Chart mode (including data downloaded from LogTags) will be added to the display.
Each of the individual charts will be displayed with a letter symbol to allow you to tell
them apart. The legend contains an entry for each chart showing the chart name and the
corresponding letter.
You can change the background colour for the Multi Chart display in the Options -
Charts
dialog.
To remove charts from the Multi Chart display, use the Single Chart (
) command to
switch to Single Chart mode, then close the files you don't want to display. Select the
Multi Chart (
) command to switch back to Multi Chart mode.
You will notice that the Data and Summary tabs are not available in the Multi Chart
display. If you require additional information about the chart data, select
Chart
Statistics
, which will be displayed separately for each chart.