Filter
Top Products
42 LogTag Analyzer
Working with batches of
LogTags
You may find that at some stage you need perform a similar task on multiple LogTags,
whether it is retrieving readings stored within the LogTags and/or preparing them for
their next use. The LogTag Analyzer software has been designed to make the effort
involved with multiple LogTags as simple as possible.
To retrieve a copy of the recorded readings stored within multiple LogTags, simply insert
each LogTag to download into the Interface cradle. The software will then automatically
retrieve the recorded data from the LogTag, save it to disk and then display the
information for you. Therefore, you will be able to retrieve the recorded readings stored
from within one or more LogTags without needing to interact with the software and/or
computer.
To prepare multiple LogTags for use you can use the "Wizard..." or the "Configure..."
wizard, available in the "LogTag" menu, depending on whether or not you want to
retrieve and save a copy of any readings recorded within the LogTags you are about to
use. Simply prepare the first LogTag(s) as per usual and at the conclusion of the last step
remove the LogTag(s) from their Interface Cradle, place the next LogTag(s) to be
prepared for their next use into an Interface Cradle and click
. Therefore, you
will be able to prepare multiple LogTags for use with minimal interaction with the
software and/or computer.