Filter
Top Products
METER SET-UP
The OneTouch
®
UltraSmart
™
Meter was preset at the factory with
the date, time and display language. The glucose units are preset
at the factory and cannot be changed. You must enter Set-up
mode to:
• Change the date, time, or display language. (Glucose units
cannot be changed.)
• Customize the meter features that allow you to track
diabetes pills, insulin doses, and insulin pump information.
• Customize advanced features such as averages, meal
schedule, target glucose range, and hypoglycaemia level.
Entering Basic Set-up Mode
To enter Set-up mode, press and hold down the Back
button and the OK button at the same time for
three seconds.
OK
54
Note:
• You need not change any of the meter settings in order to
begin testing. Simply insert a test strip to turn on the
meter and proceed with the test. (See pages 19–35.)
• It is important that the time of day is correct and that your
medication set up and mealtimes are set according to
your personal daily schedule. Otherwise, some FastFacts
™
information will not be correct.
DCO_06158108A_OUS_OB_GB 5/6/03 1:25 PM Page 54