Filter
Top Products
53
If the test does not start after applying the sample:
POSSIBLE CA
USES
Insufficient blood sample.
Defective test strip.
Sample applied after automatic
shutoff (three minutes after
inserting a test strip).
Defective meter.
WHA
T
TO DO
Repeat the test with a new test
strip and a larger sample.
Repeat the test with a new
test strip.
Repeat the test with a new test
strip; apply sample only after
“Apply Blood”, “Alternate Site”
or “Control Solution” appears
on the display.
Call your local LifeScan
Customer Service office. See
back panel for contact
information.
DCO_06158108A_OUS_OB_GB 5/6/03 1:25 PM Page 53