Filter
Top Products
Insert the lancet into the lancet holder and
push down firmly until it is fully seated. Do
not twist the lancet. Twist the protective
disk until it separates from the lancet.
Replace the OneTouch
®
UltraSoft
™
Cap. Turn
it clockwise until it is snug.
Adjust the puncture depth setting if
necessary. Twist the depth adjustment knob
toward the smaller bumps for a shallower
puncture or toward the larger bumps for a
deeper puncture.
21
Insert a Lancet.
STEP 1
Turn the cap anti-clockwise to remove it.
DCO_06158108A_OUS_OB_GB 5/6/03 1:24 PM Page 21