Filter
Top Products
33
Point the sampler down and away. Push
forward on the ejection/cocking control
and eject the lancet directly into a
container for sharp objects. Used test
strips can go into the same container.
Return the ejection/cocking control to the
middle position. Replace the cap.
Used Lancet Disposal
CAUTION: It is important to discard the used lancet carefully to
avoid injury or illness. Follow proper precautions in accordance
with local regulations when disposing of all materials.
Twist the cap counterclockwise. (Optional:
Replace the protective disk on the used
lancet by placing it on a hard surface and
pushing the lancet tip into the disk.)
Remove the Sampler Cap.
STEP 1
Eject the Lancet.
STEP 2
DCO_06158108A_OUS_OB_GB 5/6/03 1:25 PM Page 33