Filter
Top Products
17
Compare the control solution result with
the range printed on the test strip vial.
The result should fall within this range.
Result Appears in 5 Seconds.
STEP 4
Note: If you do not apply the control solution
within three minutes, the meter will turn itself off.
Remove the test strip and insert it back into the
test port to restart the test procedure.
To ensure an accurate result:
• Shake the bottle well
• Discard the first drop
• Wipe the dispenser tip
Apply Control Solution.
STEP 3
Hold the drop to the narrow channel in the
TOP EDGE of the test strip. When the
confirmation window is full, the meter will
begin to count down from 5 to 1.
(Example)
DCO_06158108A_OUS_OB_GB 5/6/03 1:24 PM Page 17