Filter
Top Products
15
To turn on the meter, insert a test strip,
contact bars end first and facing up, into the
test port. Push it all the way in until it will
go no further.
“OneTouch UltraSmart” will appear briefly
on the display.
Then “Code 9 (example), Check Code” is
displayed. Be sure the meter and test strip
codes match. If they do not, code the meter
correctly (see page 10).
How to do a control solution test:
Insert Test Strip.
STEP 1
(Example)
DCO_06158108A_OUS_OB_GB 5/6/03 1:24 PM Page 15