Filter
Top Products
Reference Manual
00809-0100-4808, Rev CA
June 2008
A-13
Rosemount 3051N
Using the Soft Input
Panel (SIP) keyboard
The SIP keyboard allows for alphanumeric input using the touch screen. The
SIP keyboard detects when you need to enter characters and will appear
automatically as required.
Menus and Functions Interpreting the HART Icon
A beating hollow heart icon is displayed when the Rosemount 375 Field
Communicator is communicating with a live HART device ( ).
A solid beating heart will replace the hollow heart icon when communicating
to a HART loop with a device in burst mode. The HART logo is displayed
during periods when communication is not occurring. This is common when
only static parameters are listed.
HART Application
Startup
To start the HART application:
1. Turn on the Rosemount 375 Field Communicator. The Rosemount
375 Main Menu is displayed with HART as the default application.
2. Double-tap HART Application. If a live HART device is connected to
the Rosemount 375 HART Field Communicator, the HART
Application main menu will be displayed automatically with key
parameters from the connected device. If a device is not connected,
the HART application main menu is displayed after a few seconds. To
navigate back to the Rosemount 375 Main Menu, press the back
arrow button.
Main Menu From the HART application main menu, you can choose Offline, Online, or
Utility functions.
• Offline - The offline menu allows you to create offline configurations,
view and change device configurations stored on the Rosemount 375.
• Online - The online option checks for a device and brings-up the online
menu if a device is found.
• Utility - The utility menu allows you to set the polling option, change the
number of ignored status messages, view the available Device
Descriptions, perform a simulation, and view HART diagnostics.
The touch screen should be contacted by blunt items only, preferably the stylus included
with the Rosemount 375 Field Communicator. The use of sharp instruments, such as
screwdrivers, can cause failure of the touch screen interface. Repair of the touch screen
requires replacement of the entire Rosemount 375 Field Communicator display assembly,
which is possible only at an authorized service center.
Use the arrow button ( ) to return to the previous menu. Use the terminate button
( ) in the upper right corner of the touch screen to end the application.