Filter
Top Products
Reference Manual
00809-0100-4808, Rev CA
June 2008
Rosemount 3051N
5-12
ROSEMOUNT 3051N 4-20 MA/HART OUTPUT SMART PRESSURE TRANSMITTERS
TYPICAL CONFIGURATION DATA WORKSHEET
CONFIGURATION DATA SHEET
Software Tag: |__|__|__|__|__|__|__|__|
OUTPUT INFORMATION: (Software Selectable)
4 mA = ____________ 0★ Key to Symbols
20 mA = ____________ Upper Range Limit ★ ★ = Typical Factory Default Value
(1)
Pressure Units = Ⅺ inH
2
O★
(2)
Ⅺ psi★
(3)
Ⅺ Pa Ⅺ ftH
2
O
Ⅺ inHg Ⅺ bar Ⅺ kPa Ⅺ g/cm
2
Ⅺ mbar Ⅺ Torr Ⅺ mmH
2
O Ⅺ inH
2
O at 4 °C
Ⅺ Atm Ⅺ kg/cm
2
Ⅺ mmHg Ⅺ mmH
2
O at 4 °C
Output = Ⅺ Linear★ Ⅺ Square Root (For DP transmitters only)
Damping
(4)
= Ⅺ 0.00 seconds Ⅺ 0.05 seconds Ⅺ 0.10 seconds Ⅺ 0.20 seconds Ⅺ 0.40 seconds★
Ⅺ 0.80 seconds Ⅺ 1.60 seconds Ⅺ 3.20 seconds Ⅺ 6.4 seconds Ⅺ 12.8 seconds
Ⅺ 25.6 seconds
(1) Default values may be different outside the U.S.A. Consult your Rosemount Representative for details.
(2) inH
2
0 for ND/NG Ranges 0, 1, 2, and 3
(3) psi for ND/NG Ranges 4 and 5, all NA ranges.
(4) Rosemount 3051NDO default damping is 3.2 seconds. Rosemount 3051ND1, with calibrations below 2.5 in H
2
O (0,62 kPa) have damping
set at 3.2 seconds.
TRANSMITTER INFORMATION: (Software Selectable)
Descriptor: |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
(16 characters)
Message: |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|
(32 characters)
Date: □ □/□ □ □/□ □
Day Month Year
Local Span and Zero: Ⅺ Enabled★ Ⅺ Disabled
LCD METER CONFIGURATION (Software Adjustable – M5 or M6 option must be specified in Rosemount number)
Meter Display Type:
Ⅺ Eng. Units only Ⅺ Alternate Eng. Units & % of Range ★
Ⅺ % of Range only Ⅺ Alternate Eng. Units & Custom Display
Ⅺ Custom Display only Ⅺ Alternate % of Range & Custom Display
Custom Display Configuration: (must be filled out if Custom Display is selected as meter type)
Decimal Point Position (fixed)
Indicate decimal point location
X
Ⅺ
X
Ⅺ
X
Ⅺ
X
Ⅺ
X
Ⅺ
Enter Lower Range Value (Decimal point must be in the same position as specified above.)
(circle sign)
+–□
Ⅺ
□
Ⅺ
□
Ⅺ
□
Ⅺ
□
Ⅺ
Default is +000.00
Enter Upper Range Value (Decimal point must be in the same position as specified above.)
(circle sign)
+–□
Ⅺ
□
Ⅺ
□
Ⅺ
□
Ⅺ
□
Ⅺ
Default is +100.00
Custom Units
Available characters: A-Z, 0-9, /,
*
, %, (blank)
□ □ □ □ □
Default is %RNGE
Custom Display Transfer Function (Independent of Analog Output)
Ⅺ Linear★
Ⅺ Square Root