16-90 ELECTRICAL SYSTEM
Immobilizer System (Equipped M odels)
•
Remove the key registration unit and connect the immo-
bilizer/Kawasaki diagnostic system connector.
NOTE
○
Turn the ignition switch ON with the registered user key.
○
Check that the engine can be started using all regis-
tered user keys.
•
Install the new ignition switch and antenna.
Case 3: When the electric control unit (ECU) is faulty
and has to be replaced.
•
Prepare a new ECU [A], current master key [B] and cur-
rent user keys [C].
NOTE
○
The key registration unit is not required.
•
Replace:
ECU [A] (see Immobilizer System Parts Replacement)
•
Insert the current master key into the ignition switch and
turn it ON.
○
If there is any problem in the registration, the warning
indicator light and immobilizer warning symbol [A] blinks
to display the collation error.
Immobilizer Amplifier Failure
Master Key Collation Error
