16-88 ELECTRICAL SYSTEM
Immobilizer System (Equipped M odels)
○
If there is any problem in the registration, the warning
indicator light (LED) and immobilizer warning symbol [A]
blinks to display the collation error.
Immobilizer Amplifier Failure
When Registered User Key is Inserted.
User Key Collation Error
•
The user key 1 is successfully registered in the ECU.
○
The warning indicator light (LED) and immobilizer warn-
ing symbol [A] blinks 2 times and stops for 1 second and
then repeats this cycle to indicate successful registering
of user key 1.
•
Turn OFF and remove user key 1.
○
The warning indicator light (LED) [A] blinks to display the
registration mode.
NOTE
○
Turn off the ignition switch and wait for the period more
than 15 seconds. The registration mode automatically
ends and warning indicator light (LED) goes off.
○
This procedure has , registered the master key and one
user key.
○
Continue the procedure to program the second and
later keys.
•
Insert the user key 2 to the ignition switch and turn it ON.
