A SERVICE OF

logo

16-42 ELECTRICAL SYSTEM
Ignition System
Remove:
Right Engine Bracket Bolts [A]
Right Engine Bracket [B]
Pull out the stick coil #4 [A] to forward.
Stick Coil (Ignition Coil together with Spark Plug
Cap) Installation
Apply grease to the stick coils.
Insert the stick coils [A] as shown being careful of the coil
heads directions.
Align the lines [B] of the cylinder head cover and coil
heads.
CAUTION
Do not tap the coil head while installing the coil.
Connect the stick coil connectors.
Run the hoses and harness correctly (see Cable, Wire,
and Hose Routing section in Appendix chapter).
Install the left and right engine bracket (see Engine Instal-
lation in the Engine Removal/Installation chapter).
Install the removed parts (see appropriate chapters).
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com