A SERVICE OF

logo

BRAKES 12-13
Brake Pads
Front Brake Pad Removal
Loosen:
Pad Pins [A]
Remove:
Pad Pins [A]
Pad Springs [B]
Brake Pads [C]
Front Brake Pad Installatio n
Push the caliper pistons in by hand as far as they will go.
Install the outside pad [A] and insert the pad pin [B] as
shown.
Set:
Inside Pad [A]
PadSpring[B]
Pushing the pin holder [C] to hole of the pad and insert
the pad pin.
Torque - Front Brake Pad Pins: 15 N·m (1.5 kgf·m, 11 ft·lb)
WARNING
Do not attempt to drive the motorcycle until a full
brake lever is obtained by pumping the brake lever
and the pads are against the disc. The brake will
not function on the first application of the lever if
this is not done.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com