A SERVICE OF

logo

13-30 SUSPENSION
Tie-Rod, Rocker Arm
Rocker Arm/Tie-Rod Bearing, Sleeve Inspection
CAUTION
Do not remove the bearings for inspection. Re-
moval may damage them.
Visually inspect the rocker arm, or tie-rod sleeves [A] and
needle bearings [B].
The rollers in a needle bearing normally wear very little,
and wear is difficult to measure. Instead of measuring,
inspect the bearing for abrasion, color change, or other
damage.
If there is any doubt as to the condition of any of the nee-
dle bearings or sleeve, replace the sleeve, and needle
bearings as a set.
Rocker Arm/Tie-Rod Bearing Lubrication
NOTE
Since the bearings are packed with grease, lubrication
is not required.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com