A SERVICE OF

logo

9-14 CRANKSHAFT/TRANSMISSION
Crankcase Splitting
Tighten the lower crankcase bolts using the following
steps.
Following the sequence numbers on the lower crankcase
half, M9 bolts [1 10] with copper plated washers.
Torque - Crankcase Bolts (M9): 39 N·m (4.0 kgf·m, 29 ft·lb)
Tighten the M7 bolts.
Torque - Crankcase Bolts (M7): 20 N·m (2.0 kgf·m, 15 ft·lb)
L=50mm(1.97in.) [A]
L=85mm(3.35in.) [B]
Install the clamp [C], and tighten the M6 bolts [D].
Torque - Crankcase Bolts (M6): 12 N·m (1.2 kgf·m, 106 in·lb)
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com