A SERVICE OF

logo

SUSPENSION 13-23
Swingarm
Swingarm Removal
Remove:
Rear Wheel (see Rear Wheel Removal in the
Wheels/Tires chapter)
Middle Exhaust Pipe (see Middle and Rear Exhaust Pipe
Removal in the Engine Top End chapter)
Engine Sprocket (see Engine Sprocket Removal in the
Final Drive chapter)
Bolts [A]
Chain Cover [B]
Inner Fender [C]
Remove:
Bolt [A]
Brake Hose Clamp [B]
Remove:
Upper Tie-Rod Nut and Bolt [A]
Rear Shock Absorber [B] (see Rear Shock Absorber Re-
moval)
Unscrew the swingarm pivot shaft nut [C].
Loosen the swingarm pivot collar locknut [A] using the nut
wrench [B].
Special Tool - Swingarm Pivot Nut Wrench: 57001-1597
Unscrew the swingarm pivot shaft [A] few times.
Turn out the swingarm pivot adjusting collar.
Pull out the pivot shaft from the right side of the motorcycle
and remove the swingarm.
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com