Leica DM4000M Microscope & Magnifier User Manual


 
10
3. Safety notes
Caution!
The power plug may only be plugged into an
outlet equipped with a grounding contact.
Do not interfere with the grounding func-
tion by using an extension cord without a
ground wire. Any interruption of the ground
wire inside or outside of the device, or re-
lease of the ground wire connection, can
cause the device to become hazardous.
Intentional ground interruption is not permit-
ted!
Caution!
Through connection to the grounding con-
nection, ancillary equipment with its own
and/or extra power supply may be brought
to the same ground wire potential. For con-
nections without a ground connector, Leica
Service must be consulted.
90-250 V~
50-60 Hz
max. 155VA
2xT2A (IEC 127)
10-36°C
max. 80% to 30°C
II
2
90-250 V~
50-60 Hz
max. 290VA
T6.3 A
(IEC 60127-2/3)
15-35°C
max. 80% to 30°C
II
2
3.2 Electrical safety
General specifications
Leica CTR5000 electronics box (for DM5000 B)
For indoor use only.
Supply voltage:
Frequency:
Power input:
Fuses:
Ambient temperature:
Relative humidity:
Overvoltage category:
Pollution degree:
Microscope
For indoor use only.
Supply voltage:
Frequency:
Power input:
DM4000
DM4500
DM5000
Fuses:
DM4000
DM4500
DM5000
Ambient temperature:
Relative humidity:
Overvoltage category:
Pollution degree:
ebq 100 supply unit*
For indoor use only.
Supply voltage:
Frequency:
Power input:
Fuses:
Ambient temperature:
Relative humidity:
Overvoltage category:
Pollution degree:
(see enclosed manual)
90-250 V~
50-60 Hz
max. 180 VA
max. 180 VA
max. 290VA
T6.3 A (IEC 60127-2/3)
T6.3 A (IEC 60127-2/3)
See CTR5000
15-35°C
max. 80% to 30°C
II
2