SECTION 10—ANTI-TIPPERS/WHEEL LOCKS
Part No. 1073955 69 Orbit
™
Adjusting Anti-Tippers
NOTE:Forthisprocedure,refertoFIGURE 10.6.
NOTE:Theanti‐tippersmustmaintaina1‐1/2to2‐inchclearancebetweenthebottomofthe
anti‐tipperwheelsandthefloor.
1. Depressthereleasebuttononthewheeledportionoftheanti‐tipperandslideit
up/downtoachievethe1‐1/2to2‐inchclearance.
ƽ WARNING
Anti-tippers MUST be fully engaged and release buttons fully protruding out of
adjustment holes.
2. Checktomakesurethatthereleasebuttonsarefullyengagedinadjustmentholesand
1‐1/2to2‐inchclearanceismaintained.
FIGURE 10.6 Adjusting Anti-Tippers
Anti-Tipper
Release
Button
Wheelchair Frame
Choose one of three
positions to maintain
1-1/2 to 2-inch
clearance