Filter
Top Products
SECTION 5—FRONT RIGGINGS
Orbit
™
32 Part No. 1073955
ƽ WARNING
DO NOT overtighten. Footrest must be
able to rotate upward from the horizon-
tal to vertical position.
4. Reinstallthemountingscrewthrough
themountingholesofthefootplateand
footrestsupport.
5. Securethefootplatetothefootrest
supportwiththecovedwasherand
locknut.Securelytighten.
FIGURE 5.3 Adjusting Footplate Height
(70° MFX and 90° Footrests Only)
Installing 3-Inch Extension
NOTE:Forthisprocedure,refertoFIGURE 5.4.
NOTE:Notethemountingholepositionofthemountingscrew,washers,andlocknutforproper
reassemblyofthefootrest.
NOTE:IfusingANYtypeofextensionwiththeadjustableanglefootplate,refertoAdjusting
Perpendicularand/orInversion/EversionAdjustableAngleFlip‐upFootplateonpage 35.
1. Remove anyaccessoriesthatareattachedtothefootrests.
2. Remove themountingscrew,washerandlocknutthatsecurethefootplatetothe
footrestsupport.
3. Insertthe3‐inchextensionintothefootrestsupportandalignthemountingholes.
4. Securethe3‐inchextensiontothefootrestsupportwithnewmountingscrew,washer
andlocknut.
5. Positionthefootplateatthedesiredheight.
ƽ WARNING
DO NOT overtighten. Footrest must be able to rotate upward from the horizontal
to vertical position.
6. Securethefootplatetothe3‐inchextensionwiththecovedwasherandlocknut.
Securelytighten.
FIGURE 5.4 Installing 3-Inch Extension
Footrest Support
Height
Adjustment
Holes
Coved Washers
Mounting
Screw
Locknut
Footplate
Footrest Support
Mounting
screw
Mounting Screw,
Coved Washer
and Locknut
3-inch
Extension
Locknut
Washer
Footplate