Support User Manuals

Invacare 1073955 Mobility Aid User Manual

Open as PDF

of 84

SECTION 6—ARMS

Part No. 1073955 51 Orbit

™

Replacing and Adjusting Arm Pad Depth for Cantilever

Arms

NOTE:Forthisprocedure,refertoFIGURE 6.11.

Adjustment

1. Remove themountingscrewfromtherearofthearmrestpadandself‐tapingscrewif

fulllengtharmpads.

2. Dependingonthedesiredarmpaddepth,repositionthecantileverslidetubetoone

offivepositionsfordesklengtharmpadsandintothefirstadjustmentholeforthefull

lengtharmpads.

3. Reattachthearmpad/cantileverslidetubetothearmtubewithexistinghardware.

4. Repeatfortheoppositeside,ifnecessary.

Replacement

1. Remove themountingscrewsfromthearmrestpad.

2. Replacewithnewarmrestpad.

3. Securewithexistinghardware.

FIGURE 6.11 Replacing and Adjusting Arm Pad Depth for Cantilever Arms

Mounting Screw

(Rear of Armrest Pad)

Cantilever Slide Tube

NOTE:Thismountingscrewonlyneedsto

beremovedwhenarmrestpadisreplaced.

NOTE:Onlythese

AdjustmentHoles

canbeused.

Cantilever Arm

Self-Tapping Screw

Cantilever Slide Tube

Mounting Screw

(Rear of

Armrest Pad)

NOTE:Thismountingscrewonlyneedstobe

removedwhenarmrestpadisreplaced.

DETAIL “A” - DESK LENGTH ARM PADS

DETAIL “B” - FULL LENGTH ARM PADS

previous next