Support User Manuals

Invacare 1073955 Mobility Aid User Manual

Open as PDF

of 84

SECTION 5—FRONT RIGGINGS

Part No. 1073955 35 Orbit

™

FIGURE 5.8 Adjusting Depth on Adjustable Angle Flip-Up - Adjusting Angle on Adjustable

Angle Flip-up Footplate

Adjusting Perpendicular and/or Inversion/Eversion Adjustable Angle

Flip-up Footplate

NOTE:Forthisprocedure,referto

FIGURE 5.9.

NOTE:Itisnotnecessarytoremovethe

footplatetoperformthisadjustment.

1. Insertaflatheadscrewdriverthrough

thehalfclampontheadjustableangle

footplate.

2. Slowlyturnthenylonadjustment

screwinoroutuntiltheadjustable

anglefootplateisperpendiculartothe

footrestassemblyorthedesired

inversionoreversionisobtained.

FIGURE 5.9 Adjusting Perpendicular

and/or Inversion/Eversion Adjustable Angle

Flip-up Footplate

Bilateral Contracture Platform Procedures

ƽ WARNING

The footrest assembly MUST be at least 1-3/4-inches above the ground/floor to

avoid hitting protruding objects when using this wheelchair.

NOTE:Forthisprocedure,refertoFIGURE 5.10onpage36.

Installing Bilateral Contracture Platform

NOTE:Ifaseatingsystemisbeingusedonthechair,refertotheseatingsystemOwner ʹsManual

forinstallationandremovaloftheseatingsystem.

1. Remove theexistingseatingsystemfromthewheelchair,ifsoequipped.

2. Remove existingfootrestfromthewheelchair.RefertoInstalling/RemovingFront

Riggingsonpage 30.

3. Remove thetelescopingtubesfromthewheelchair.Referto

Installing/Removing/AdjustingtheTelescopingFrontFrameTubes

onpage 38.

Footplate

Footrest Support

Front View of

Footplate and

Footrest

Support

Footrest

Support

Footplate

Side View Of

Footplate and

Footrest

previous next