Support User Manuals

Invacare 1073955 Mobility Aid User Manual

Open as PDF

of 84

SECTION 5—FRONT RIGGINGS

Orbit

™

34 Part No. 1073955

Installing/Adjusting the Adjustable Angle Flip-up

Footplates

ƽ WARNING

When determining the angle of the

footplates, make sure the rear of the

footplates do not interfere with the

movement of the front casters.

NOTE:Forthisprocedure,referto

FIGURE 5.7.

Installing Adjustable Angle Flip-up

Footplate

1. Slidethehalfclampoverthefootplate

hinge.

2. Looselytightenthetwoflatscrewsthat

securethefootplatetothehalfclamp.

3. Adjustthefootplatestothenecessa ry

angleanddepthforthe user.Refertothe

followingsectionsofthisprocedure.

FIGURE 5.7 Installing Adjustable Angle

Flip-up Footplate

Adjusting Depth on Adjustable Angle Flip-Up

NOTE:Forthisprocedure,refertoFIGURE 5.8onpage35.

NOTE:Observetheangleofthearticulatingfootplateforreinstallation.

1. Remove thetwoflatscrews,washersandlocknutsthatsecurearticulatingfootplateto

thefootplatehinge.

2. Movethearticulatingfootplatetooneoffourmountingpositions.

NOTE:Ifdesireddepthisstillnot

obtained,rotatethehalfclamponthefootplatehinge180

o

.

3. Retightenthetwoflatscrews,washersandlocknuts.

NOTE:Thesettingsforpositioningthearticulatingfootplatesonthehalf‐clampsmayvaryfor

eachfootplate.

Adjusting Angle on Adjustable Angle Flip-up Footplate

NOTE:Forthisprocedure,refertoFIGURE 5.8onpage35.

1. Loosen,butdonotremovethetwoflatscrewsandlocknutsthatsecurethefootplate

tothefootplatehinge.

2. Positiontheadjustableangleflip‐upfootplatetothedesiredangle.

3. Retightenthetwoflatscrewsandlocknuts.

Articulating

Footplate

Flat

Screws

Locknuts

Washers

Half

Clamp

90

o

Footrest

Support

Nylon

Adjustment

Screw

Footplate

Hinge

Footplate

Hinge

Half

Clamp

previous next