Support User Manuals

Invacare 1073955 Mobility Aid User Manual

Open as PDF

of 84

SECTION 6—ARMS

Part No. 1073955 49 Orbit

™

Installing/Removing/Adjusting Catilever Arms

NOTE:Toremove,reversethisprocedure.

NOTE:Whenremovingthelocknutsandwashersfromthecantileverarmassembly,leavethetop

mountingscrew,covedwashersandspacer(betweenadjustmentplateandcantileverarm)inplace.

1. Slidethepartiallyassembledcantileverarmassemblywithmountinghardware

throughthebackcane.Makesuretheadjustmentplateistowardstheinsideofthe

wheelchair.

NOTE:Thisincludestopmountingscrew,covedwashersandspacer(betweenadjustmentplate

andcantileverarm).

2. Slidethebottommountingscrew(withcovedwasher)throughtheadjustmentplate

andbackcane.

3. Securelytightenthecantileverarmtothewheelchairwithtwolocknutsandwashers.

FIGURE 6.9 Using/Installing/Adjusting Cantilever Arms

Locknuts

Bottom

Mounting

Screw

Coved

Washers

Back Cane

Adjustment

Plate

Actuator

Spacer

Washers

Cantilever Arm

Top Mounting Screw

and Coved Washer

previous next