Support User Manuals

Invacare 1073955 Mobility Aid User Manual

Open as PDF

of 84

SECTION 7—SEAT AND BACK

Part No. 1073955 53 Orbit

™

Installing Fixed Height Stroller Handles

NOTE:Forthisprocedure,refertoFIGURE 7.2.

1. Remove thebackcanegripandplugbuttonfromthebackcane.

2. Slidethestrollerhandleintothebackcane.

3. Alignthemountingholesofthestrollerhandleandthebackcane.

4. Pressthebuttononthequick‐releasepinandinsertthequick‐releasepinthroughthe

backcaneandstrollerhandle.

5. RepeatSTEPS1‐4fortheoppositestrollerhandle.

6. Pullonthestrollerhandletomakesureitislockedsecurelyinplace

FIGURE 7.2 Installing Fixed Height Stroller Handles

Installing/Removing/Adjusting the Adjustable Angle

Stroller Handles

NOTE:Strollerhandlesinstallinthesamemannerforreclinerandnon‐reclinermodels.

Installing Adjustable Angle Stroller Handles

NOTE:Forthisprocedure,refertoFIGURE 7.3onpage54.

1. Remove thebackcanegripsandplugbuttonsfrombothbackcanes.

NOTE:Plugbuttonsfoundonlyonrecliners.

2. Slidetheadjustableheightstrollerhandleintothebackcanes.

3. Alignthemountingholesoftheadjustableheightstrollerhandleandthebackcane.

4. Secureadjustableheightstrollerhandletothebackcaneswiththetwomounting

screwsprovided.Securelytighten.

5. Ifnecessary,adjusttheheight.RefertoAdjustingAdjustableAngleStrollerHandles



onpage 54.

Quick-Release Pin

Back Cane

Stroller

Handle

Button

Back Cane

Grip (STEP 1)

Plug Button

(STEP 1)

previous next