Support User Manuals

Invacare 1073955 Mobility Aid User Manual

Open as PDF

of 84

SECTION 5—FRONT RIGGINGS

Part No. 1073955 31 Orbit

™

Adjusting Footplate Height

NOTE:Releasethefootrestlockingmechanismandliftthemountingpinoutofthemountingtube.

Laytheassemblyonaflatsurfacetosimplifythisprocedure.

Adjusting Pivot Slide Tube Height

NOTE:Forthisprocedure,refertoFIGURE 5.2.

1. Remove anyaccessoriesthatareattachedtothefootrests.

2. Remove themountingscrewandcovedwasherandpositionthefootrestassemblyto

thedesiredheight.

3. Alignthemountingholeinthefootrestsupport,reinsertthemountingscrewand

covedwasherandsecurelytighten.

4. RepeatSTEPS1

‐3fortheotherfootrest.

5. Reinstallanyaccessoriesattachedtothefootrest.

FIGURE 5.2 Adjusting Footplate Height

Adjusting Footplate Height (70° MFX and 90° Footrests Only)

NOTE:Forthisprocedure,refertoFIGURE 5.3onpage32.

1. Remove anyaccessoriesthatareattachedtothefootrests.

2. Remove themountingscrew,covedwasherandlocknutthatsecurethefootplateto

thefootrestsupport.

3. Repositionthefootplatetothedesiredheight.

Footrest

Support

Mounting Screw

Footrest

Coved

Washer

previous next