Support User Manuals

Invacare 1073955 Mobility Aid User Manual

Open as PDF

of 84

SECTION 4—ASSEMBLY

Part No. 1073955 27 Orbit

™

SECTION 4—ASSEMBLY

ƽ WARNING

After any adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely. Otherwise injury or damage may occur.

Assembling/Disassembling the Removable Orbit

Wheelchair

NOTE:Forthisprocedure,refertoFIGURE 4.1onpage29.

Assembling the Seat Frame to the Base Frame

1. Unfoldbackcanes.RefertoFolding/UnfoldingtheBackCanesonpage 56.

2. Ifsoequipped,unfoldcantileverarms.RefertoUsing/Installing/AdjustingCantilever

Armsonpage 48.

3. Ifsoequipped,installtheT‐arms.RefertoInstalling/RemovingtheT‐armson

page 42.

4. Installrearwheels.RefertoRemoving/InstallingRearWheelsonpage 61.

5. Turntheplungerslocatedontheundersideofthebaseframeplateuntilanaudible

clickisheard.SeeDetailʺAʺofFIGURE 4.1.

6. Visuallyinspectthebaseframeplatetoensurethelockingbuttonsprotrudeallthe

waythroughtheplate.

7. Placeseatframeplateonbaseframeplatedepressingthelockingbuttons.

8. Slideseatframerearward.

ƽ WARNING

Ensure both sides of seat frame plate are underneath the locking channels of the

base frame plate and the seat frame is securely locked in place before using the

wheelchair, otherwise injury may result.

9. Withbothsidesofseatframeplateunderneaththelockingchannelsofthebaseframe

plate,continuetoslideuntilanaudibleclickfrombothlockingbuttonsisheard.

NOTE:Ifanaudibleclickisnotheardfrombothlockingbuttons,wiggleseatframeplatebackand

forthuntilanaudibleclickisheard.Thiswillensuretheseatframeislockedintoposition.

ƽ WARNING

Make sure the locking pins of the quick-release pin are fully released before operat-

ing the wheelchair.

previous next