Filter
Top Products
Instruction Manual
IM-106-880, Rev 1.0
January 2007
OCX 8800
6-20
Install Eductor
If installed, the O
2
cell and heater strut assembly (9, Figure 6-5) must be
removed from sensor housing (8), before you install the eductor.
1. Apply pipe thread sealant (Loctite #567) to the external pipe threads of
eductor (6, Figure 6-15). Do not apply sealant to the first turn of the pipe
threads.
Figure 6-15. Installation of
Eductor and COe Sensor
37390047
1
5
6
7
8
9
10
11
12
13
14
1. Insulator
2. Dilution AirTube
3. COe Extractive Tube
4. Eductor AirTube
5. COe Sensor Assembly
6. Eductor
7. Sensor Housing
8. COeThermocouple
9. Heater Insulator
10. COe Band Heater
11. Sensor Holder
12. Eductor Elbow
13. Terminal Block Mounting
14. Eductor Holder
15. Tube Fitting
16. CJC Sensor
16
2
3
4
15