Filter
Top Products
4 Micro Motion
®
Series 3000 MVD Transmitters
NOC Overview
2.2.1 NOC system components
The Series 3000 MVD NOC system requires:
• One Series 3000 MVD transmitter with the Net Oil Computer software option
• One Micro Motion sensor installed on the oil/water or oil leg
Optional components include:
• A meter on the gas leg. This meter can be used for gas measurement with or without Transient
Mist Remediation:
- If only gas measurement will be implemented, either a third-party meter or a
Micro Motion meter may be used. Gas measurement must be based on mass flow.
- If Transient Mist Remediation will be implemented, a Micro Motion meter must be used.
• A water cut monitor on the oil/water or oil leg.
• A pressure sensor on the oil/water or oil leg. Data from the pressure sensor enables pressure
compensation (see Section 2.3.2).
2.2.2 Installation architecture
The Series 3000 MVD NOC system is designed for installation with a three-phase separator, a
two-phase separator, or a variety of compact separators. See Figures 2-1 through 2-3.
Note: These figures do not illustrate all possible combinations.