Net Oil Computer Supplement 49
Operation Mode – NOC
Troubleshooting IndexSeries 3000 MenusNOC Operation
5.3 Continuous mode measurement overview
In Continuous mode, measurement begins as soon as the system is up and running, or as soon as the
system is configured for Continuous mode measurement. You cannot start and stop Continuous mode
measurement. However, you can:
• Pause and resume measurement
• View current data
• Reset the start time for summary variables
• Write archive records that summarize well production from the beginning of the Continuous
mode time period up to the point the record is written.
• View archive records
• Recalculate archive records
Continuous mode measurement is managed from the Well Performance Measurement menu under the
View menu, shown in Figure 5-3.
Table 5-5 Recalculation parameters – Well Test mode
Parameter Configurable? Definition
Original Ref Temp
(1)
(1) If the value was changed during the well test, the value displayed here is the value in use when the well test was stopped.
No Reference temperature for NOC calculations applied during data
collection
Recalc Reference Temp Yes Reference temperature to used for recalculation
Orig Water Density
(1)
No Reference density of water from this well applied during data collection
Recalc Water Density Yes Reference density of water to be used for recalculation
Original Oil Density
(1)
No Reference density of oil from this well applied during data collection
Recalc Oil Density Yes Reference density of oil to be used for recalculation
Original Press Comp Oil
(1)
No Pressure compensation factor for oil applied during data collection
Recalc Press Comp Oil Yes Pressure compensation factor for oil to be used for recalculation
Original Ref Pressure
(1)
No Reference pressure applied during data collection
Recalc Ref Pressure Yes Reference pressure to be used for recalculation
Original Gas Ref Density
(1)
No Reference density of gas from this well applied during data collection
Recalc Gas Ref Dens Yes Reference density of gas to be used for recalculation
Original Factor for Oil
(1)
No Shrinkage factor for oil from this well applied during data collection
Recalc Factor for Oil Yes Shrinkage factor for oil to be used for recalculation
Original Factor for Water
(1)
No Shrinkage factor for water from this well applied during data collection
Recalc Factor for Water Yes Shrinkage factor for water to be used for recalculation