Filter
Top Products
Figure 11. Removing and Installing the Front Bezel
1. system 2. front bezel
3. keylock 4. release latch
Removing The Front Bezel
1. Insert the bezel key in the keylock.
2. Keeping the keylock pressed with the bezel key, rotate the keylock to the unlocked position.
3. Press down on the release latch at the top of the bezel.
4. Rotate the top end of the bezel away from the system.
5. Unhook the bezel tabs from the slots on the front of the chassis.
System Feet—Tower Mode
The system feet provide stability to the system in the tower mode.
Removing The System Feet
NOTE: It is recommended that you remove the system feet only when you are converting the system from the
tower mode to the rack mode, or when you are replacing the system feet with the wheel assembly.
1. Rotate the system feet inward.
2. Lay the system on its side on a flat, stable surface.
3. Remove the screws securing the system feet to the base of the tower.
41