Key Operator Setting
176
9
Note
r To change a box already pro-
grammed, press it, and then
proceed to step
H
. If a password
has been programmed, enter
the password, press [OK], and
then proceed to step
H
.
F Press [Information Box].
G Enter a box name, and then press
[OK].
Reference
“Entering Text”, General Set-
tings Guide
H Enter the SEP Code.
Note
r To change the SEP Code, press
[Clear] or the {Clear/Stop} key,
and then try again. To change
the box name, press [Box Name],
and then repeat the procedure
from step
G
.
I Press [Password].
Note
r If you do not want to program a
password, proceed to step
M
.
J Enter a password, and then press
[OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key be-
fore pressing [OK], and then try
again.
K Re-enter the password, and then
press [OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key be-
fore pressing [OK], and then try
again.
r If you want to change the pass-
word after pressing [OK], press
[Change], and then perform
from step
J
.
L Press [OK].
M Press [OK].
N Press [Exit].
O Press the {User Tools/Counter} key.
The standby display appears.
