147
9. Key Operator Setting
Key Operator Tools List
You can program, change, or delete standard messages and auto documents.
You can also set the line type for the machine connection, program various IDs
(including a Polling ID), fax destinations, and many other items. In addition, you
can check the number of documents transmitted and received.
Function name Description Reference
Program/Change/Delete
Standard Message
You can program, change, or
delete standard messages
printed at the top of the first
page of each incoming mes-
sage.
p.149 “Programming, Chang-
ing, and Deleting Standard
Messages”
Store/Change/Delete Auto
Document
You can program, change, or
delete pages stored as auto
documents.
p.149 “Programming, Chang-
ing, and Deleting Standard
Messages”
Program/Change/Delete
Scan Size
You can program, change, or
cancel frequently used scan
sizes.
p.152 “Programming, Chang-
ing and Deleting a Scan Size”
Print Journal Prints a Journal. p.154 “Printing the Journal”
Transmission Page Count Checks the transmission and
reception, and totals on the
display.
p.154 “Counters”
Forwarding Transfers received messages
to a programmed receiver
(forwarding destination).
p.155 “Forwarding”
Memory Lock RX Switches the Memory Lock to
on or off. To use it, program
an ID for printing a message
received in Memory Lock
mode.
p.157 “Memory Lock”
ECM If part of the transmission fails
due to a telephone line fault,
this function resends the
failed part automatically.
p.158 “ECM”
Parameter Setting Allows you to change and
print the function settings to
meet your needs.
p.159 “User Parameters”
Program Special Sender By programming particular
receivers as Special Sender in
advance, you can have Special
Senders treated differently.
p.166 “Programming/ Chang-
ing Special Senders”
