Scan Settings
33
2
r You can have the machine return
to the original type default setting
after every transmission, with
[Scan End Reset] under Gen. Set-
tings/Adjust. See p.142 “General
Settings/Adjustment”, Facsimile
Reference <Advanced Features> .
A Press [Original Type].
B Select the original type you re-
quire, and then press [OK].
Image Density (Contrast)
The text and diagrams on originals
should stand out clearly from the paper
they are on. If your original has a darker
background than normal (for example,
a newspaper clipping), or if the writing
is faint, adjust the image density.
v Auto Image Density
The appropriate density setting for
the original is automatically select-
ed.
v Manual Image Density
Use manual image density to set
image density yourself.
You can select one of seven image
density levels.
v Combined Auto and Manual Image
Density
You can only adjust image density
for photographs, illustrations, or
diagrams if the original has a dark
background.
You can select one of seven image
density levels.
Note
r Selecting [Text] or [Text/Photo] for
the original type causes [Auto Image
Density] to be selected.
r You can set the image density that
is selected right after the machine
is turned on or modes are cleared,
with [Auto Image Density] under
[Gen. Settings/Adjust]. See p.142
“General Settings/Adjustment”,
Facsimile Reference <Advanced Fea-
tures> .
r You can have the machine return
to the image density default set-
ting after every transmission, with
[Scan End Reset] under [Gen. Set-
tings/Adjust]. See p.142 “General
Settings/Adjustment”, Facsimile
Reference <Advanced Features> .
