Key Operator Setting
162
9
Changing the User Parameters
Important
r We recommend you print and
keep a User Parameter list when
you program or change a User Pa-
rameter. See p.162 “Printing the
User Parameter List”.
r Do not change any bit switches
other than those shown on the pre-
vious pages.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Parameter Setting].
E Select the switch number you
want to change.
F Select the bit number you want to
change.
When the bit number is pressed,
the current value switches be-
tween 1 and 0.
Note
r Repeat from step
F
to change
another bit number for the same
switch.
G Press [OK].
Note
r To cancel these settings, press
[Cancel]. The display returns to
that of step
E
.
H Repeat steps
E
and
F
to change
the switch settings.
I After all the settings are finished,
press [Exit].
J Press the {User Tools/Counter} key.
The standby display appears.
Printing the User Parameter List
Print this list to see the current User
Parameter settings. However, only
items of importance or often-used
items are included in the list.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Print List] next to [Parameter
Setting].
Note
r To cancel printing a list, press
[Cancel]. The display returns to
that of step
D
.
