Simplifying the Operation
126
7
Example of registering a program
using Send Later with the fax
number “0123456789”
A Press {0}, {1}, {2}, {3}, {4}, {5},
{6}, {7}, {8}, {9} using the
number keys.
B Perform the Send Later setting
till the procedure of pressing
[OK] key to return to the stand-
by mode.
Reference
p.3 “Sending at a Specific
Time (Send Later)”
C Press the {Program} key.
D
Make sure that
[
Register
]
is selected.
E
Select a program number in which
“*Not Programed” is shown
.
Note
r If you make a mistake, press
[Cancel] and select a program
number again.
r When you change a Keystroke
Program, press [Register] after
pressing the program number
you want to change. If you
make a mistake, press [Do not
Register] and return to step
E
.
F Enter the program name, and then
press [OK].
The standby display appears.
Note
r If you make a mistake, press
[Backspace] or [Delete All], and
then try again.
r You should register the pro-
gram name.
r To cancel a programmed pro-
gram, press [Cancel]. The dis-
play returns to that of step
E
.
Reference
"Entering Text", General Settings
Guide
Registering a priority function using a
program
You can select whether or not the
function registered in program No. 1
will be set after the power is turned
on or the {Clear Modes} key is pressed.
After registering a function in pro-
gram No. 1, select [Program No.1] for
[Change Initial Mode] on the Facsimile
Features menu. See p.142 “General
Settings/Adjustment”.
Note
r For this purpose, program No.1
does not allow you to program
destinations, Polling Transmis-
sion, User Transmission, Store File,
Scan Area, resolution, Image Den-
sity and Send Stored-file functions.
