Invacare P9000 Mobility Aid User Manual


 
23
FIGURE 6 - REPLACING ARMREST PLATE
Joystick Mounting
Bracket
Hex Bolts
Spacers
Locknuts
Phillips
Screw
Armrest Insert
Phillips Screw
Armrest Pad
Armrest Plate
Lug Bolt
Washers
Locknuts
Washers
Seat Frame
Assembly
REPLACING SEAT POSITIONING
STRAP (FIGURE 7)
NOTE: The following procedure is for Captain's Seats only.
1. Remove the Captain's seat from the wheelchair. Refer
to REMOVING/INSTALLING CAPTAIN'S SEAT in
PROCEDURE 9 of the owner's manual, part number
1080737.
2. Remove the two (2) hex bolts, washers and locknuts
that secure the seat positioning strap to the seat frame
assembly.
3. Remove the two (2) halves of the seat positioning strap
from the seat frame assembly.
4. Position the two (2) new seat positioning strap halves
on the inside of the seat frame assembly as shown in
FIGURE 7.
FIGURE 7 - REPLACING SEAT POSITIONING STRAP
Seat Positioning
Strap
Seat Frame
Assembly
Hex Bolt
Washer
Locknut
Washers
FIGURE 8 - REPLACING CAPTAIN'S SEAT
Hex Screws
(Apply Loctite
242)
Seat Frame
Assembly
Captain's Seat
Seat Frame
Assembly
5. Position the mounting holes in the two (2) new seat
positioning strap halves with the mounting holes in the
seat frame assembly.
6. Reinstall the two (2) hex bolts, washers and locknuts
that secure the seat positioning strap to the seat frame
assembly and tighten securely.
7. Install the captain's seat onto the wheelchair.
Refer to REMOVING/INSTALLING CAPTAIN'S
SEAT in PROCEDURE 9 of the owner's manual,
part number 1080737.
REPLACING CAPTAIN'S SEAT
(FIGURE 8)
1. Remove the Captain's seat from the wheelchair. Refer
to
REMOVING/INSTALLING CAPTAIN'S SEAT in
PROCEDURE 9 of the owner's manual part number
1080737.
2. Remove the four (4) hex screws and washers that se-
cure existing captain's seat to the seat frame assembly.
3. Line up mounting holes in the new captain's seat
with mounting holes in the seat frame assembly.
4. Apply Loctite 242 to the hex screws.
5. Install the four (4) hex screws and washers through
the seat frame assembly and into the new captain's
seat. Tighten securely.
6. Install the new captain's seat onto the wheelchair.
Refer to
REMOVING/INSTALLING CAPTAIN'S
SEAT in PROCEDURE 9 of the owner's manual, part
number 1080737.
REPOSITIONING MKIV JOYSTICK -
CAPTAIN’S SEAT (FIGURE 9)
1. Turn the lever on the adjustment lock to release the
adjustment lock from joystick mounting tube.
2. Remove the joystick from the wheelchair.
PROCEDURE 8
FWD WHEELCHAIRS
F
W
D
W
H
E
E
L
C
H
A
I
R
S