Filter
Top Products
19
9. Install the battery box(es) into the wheelchair. Refer to
INSTALLING/REMOVING BATTERY BOX(ES) in the
PROCEDURE 8 - FWD MODELS or PROCEDURE
9 - RWD MODELS of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in the PROCEDURE
8 - FWD MODELS or
PROCEDURE 9 - RWD
MODELS of this manual.
DETAIL “B”
NOTE: Battery clamps exploded away for clarification purposes only.
Mounting Plate
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
Hex Screw
Negative (-) BLACK
Battery Cable
Positive (+) RED
Battery Cable
Battery Clamp
POSITIVE (+) Battery Terminal/
Post and Battery Clamp
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
Positive (+)
RED Battery
Cable
Negative (-) BLACK
Battery Cable
Group 22NF Battery
POSITIVE (+) Battery
Terminal/Post
22NF Battery
NEGATIVE (-) Battery Terminal/Post
TOP VIEW
EXPLODED
VIEW
RED Battery Clamp Cover
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
BLACK Battery Clamp Cover
22NF Battery
Tie-Wrap
POSITIVE (+) Battery
Terminal/Post
PROCEDURE 7BATTERIES
B
A
T
T
E
R
I
E
S
DETAIL "A"
Fuse Box
Fuse Box placement
when box top
is installed