Filter
Top Products
46
REPLACING BATTERY BOX
RETAINING STRAP (FIGURE 1)
1. Remove the battery box(es). Refer to INSTALLING/
REMOVING THE BATTERY BOX(ES) in PROCE-
DURE 6 of this manual.
WARNING
The retaining strap MUST be fed through the ad-
justable end of the battery box retaining strap
clip as shown in FIGURE 1.
2. Feed the existing battery box retaining strap through
the battery box retaining strap buckle.
3. Feed the existing battery box retaining strap through
the slot in the battery box tray.
This Procedure includes the following:
Replacing Battery Box Retaining Strap
4. Feed the new battery box retaining strap through the
inside of the slot in the battery box tray.
5. Feed the new battery box retaining strap through the
adjustable end of the battery box retaining strap buckle.
6. Reinstall the battery box(es). Refer to INSTALLING/
REMOVING THE BATTERY BOX(ES) in PROCE-
DURE 6 of this manual.
WARNING
The Battery Box Retaining Strap MUST be fastened
securely in place before using the wheelchair.
NOTE: The retaining strap should fit snug over the bat-
tery box(es) when properly adjusted.
NOTE: Tray shown by itself for clarity. There is no need to
remove the tray from the wheelchair if the retaining strap
is being replaced.
FIGURE 1 - REPLACING BATTERY BOX RETAINING STRAP
Slot
Battery Box
Tray
Retaining Strap
Retaining Strap
Buckle
R
E
T
A
I
N
I
N
G
S
T
R
A
P
RETAINING STRAPPROCEDURE 8