Filter
Top Products
26
This Procedure includes the following:
Replacing the Seat Upholstery
Replacing the Back Upholstery
Replacing the Seat Restraint
3. Secure the new back upholstery to the back canes
with the eight (8) phillips screws and washers.
WARNING
After making adjustments, always make sure that
parts are properly tightened BEFORE using the
wheelchair.
REPLACING THE SEAT
UPHOLSTERY (FIGURE 1)
1. Remove the eight (8) phillips screws that secure the
existing seat upholstery to the crossbraces.
2. Remove the existing seat upholstery from the
crossbraces.
3. Line up mounting holes in new seat upholstery with
mounting holes in the crossbraces.
4. Securely tighten with existing phillips screws.
NOTE: Clean upholstery with warm DAMP cloth and mild
detergent to remove superficial soil.
WARNING
Laundering or moisture will reduce flame retar-
dation of the upholstery.
REPLACING THE BACK
UPHOLSTERY (FIGURE 2)
1. Remove the eight (8) phillips screws and washers
that secure the back upholstery to the back canes.
2. Position the new back upholstery on the back canes.
Make sure the mounting holes in the back upholstery
line up with the mounting holes in the back canes.
REPLACING THE SEAT RESTRAINT
(FIGURE 3)
1. Remove the two (2) rear phillips screws and washers
that secure the seat upholstery and seat restraint to
the crossbraces.
2. Remove the two (2) halves of the seat restraint
from the crossbraces.
3. Reposition the two (2) new seat restraint halves be-
tween the seat upholstery and the crossbraces.
4. Reinstall the rear phillips screws and washers that
secure the seat upholstery and seat restraint to the
crossbraces.
NOTE: Washer is positioned on top of the seat upholstery.
FIGURE 2 - REPLACING THE BACK UPHOLSTERY
Seat
Upholstery
FIGURE 1 - REPLACING THE SEAT UPHOLSTERY
Phillips
Screws
Phillips
Screws
Washers
Back
Upholstery
Back Cane
R
E
S
T
R
A
I
N
T
U
P
H
O
L
S
T
E
R
Y
PROCEDURE 4 UPHOLSTERY/RESTRAINT
FIGURE 3 - REPLACING THE SEAT RESTRAINT
Crossbrace
Washer
Phillips Screw
Seat Upholstery
Seat Restraint