Filter
Top Products
24
3. Lock the armrest by pressing the height adjustment
lever into the DOWN (VERTICAL) position when the
desired height is achieved.
Removing Armrests
1. Unlock the armrest by rotating the armrest release
lever towards the outside of the wheelchair.
2. To remove the armrest from the wheelchair, pull the
armrest straight up/out of the arm sockets.
Replacing Armrests
1. Insert the armrest into the arm sockets on the wheel-
chair.
NOTE: Armrest release levers MUST be in the unlocked
position when placing armrest into the arm sockets.
2. Lock the armrests by rotating the armrest release
lever towards the inside of the wheelchair.
REPLACING/REPOSITIONING
DESK/FULL LENGTH ARMREST
PAD/PLASTIC SNAP (FIGURE 2)
Replacing
NOTE: If replacing the armrest pad on the armrest that
the controller is mounted on, make sure the plastic snap
is BETWEEN the two mounting holes on the armrest.
1. Remove the phillips screws that secure the armrest
pad(s) to the armrest assembly.
2. Replace armrest pad and securely tighten with the
existing phillips screws.
Repositioning
NOTE: If the controller position is changed from the right
side of the wheelchair to the left side or vice versa, the
armrest pad and plastic snap must be repositioned as well.
1. Remove the phillips screws that secure the armrest
pad(s) to the armrest assembly.
2. Remove the plastic snap from the armrest.
This Procedure includes the following:
Adjusting Armrest Height, Removing or
Replacing Armrests
Replacing/Repositioning Desk/Full Length Arm-
rest Pad/Plastic Snap
Replacing Clothing Guards (Fixed Height Arms
Only)
PROCEDURE 3 ARMS
A
R
M
S
Locked
Height Adjustment
Lever
FIGURE 1 - ADJUSTING ARMREST HEIGHT,
REMOVING OR REPLACING ARMRESTS
Armrest
Release
Levers
Unlocked
Unlocked
Locked
Top View of
Armrest Release
Lever
WARNING
After adjustments and before use make sure all
attaching hardware is securely tightened and
torqued to specifications.
ADJUSTING ARMREST HEIGHT,
REMOVING OR REPLACING
ARMRESTS (FIGURE 1)
WARNING
Make sure the locking mechanism is secured
before using the wheelchair.
Adjusting Armrest Height
1. Unlock the armrest by flipping the height adjustment
lever on the top front of the armrest to the UP (HORI-
ZONTAL) position.
2. Adjust armrest to desired height.
NOTE: The height adjustment lever MUST be in the unlocked
position when placing armrest into the arm assembly.