Filter
Top Products
27
This Procedure includes the following:
Adjusting Seat Width
Adjusting Seat Depth
ADJUSTING SEAT WIDTH
(FIGURE 1)
1. Remove the battery box(es) and battery tray from
the wheelchair. Refer to INSTALLING/REMOVING
BATTERY BOX(ES) and INSTALLING/REMOVING
BATTERY TRAY in PROCEDURE 6 of this manual.
2. Remove the existing back and seat upholstery from
the wheelchair. Refer to REPLACING THE BACK
UPHOLSTERY and REPLACING THE SEAT UP-
HOLSTERY in PROCEDURE 4 of this manual.
NOTE: If adjusting the seat width of the wheelchair, the
back and seat upholstery MUST be changed as well.
FIGURE 1 - ADJUSTING SEAT WIDTH
WARNING
The following procedures should only be performed
by an Invacare dealer or qualified technician.
After making adjustments, always make sure that
parts are properly tightened BEFORE using the
wheelchair.
Note orientation of hex screw, bushing,
washers, coved washers and locknut for
installation of new crossbraces.
Wheelchair
Frame
Crossbrace
Saddle
Crossbrace
Locknut
Pivot Link
Wheelchair
Frame
Washer
S
E
A
T
F
R
A
M
E
PROCEDURE 5SEAT FRAME
Hex
Screws