Invacare 1080556 Wheelchair User Manual


 
Solara™ 8 Part No. 1080556 Rev. I
INVACARE SOLARA
Overall Width: Seat Width + 8-1/4-inches (Example: 16-inch Wide Wheelchair =
24-1/4-inches Overall Width)
Overall Depth: W/O Front Riggings
Short Frame - 29-1/2-inches
Medium Frame - 32-1/2-inches
Long Frame - 34-1/2-inches
Overall Height: * Seat-to-Floor Height + 21-inches (20-inch back canes)
* Seat-to-Floor Height + 25-inches (24-inch back canes)
Shipping Weight: 57 lbs.
Anti-Tippers: Standard
Footrest: Swing-Away Footrest (Standard)
Articulating Swing-Away Footrest (Optional)
Armrests: Dual Point - Adjustable Height
Dual Point Fixed Height - Desk Length
Dual Point Fixed Height - Full Length
Locking Cantilever Arms- Desk or Full length
Non-locking Cantilever Arms
Adjustable Height - T-Arms
Seat: Optional
Seat Pan Color: Black
Back: Optional
Back Angle Adjustment: 90° to 120°
Rear Axle: Quick-Release
Fixed
Rear Wheels: 12-inches Pneumatic (Standard); 12-inch Pneumatic w/flat free (Optional);
20 and 22-inch Pneumatic, Urethane or Pneumatic w/flat free (Optional)
Handrims: Aluminum Handrims
Caster Size: 6 x 2-inch w/ Precision Sealed Bearings (Standard)
8-inch w/ Precision Sealed Bearings (Optional)
6 x 1-inch w/ Precision Sealed Bearings (Optional)
Seat Width: 12 to 22-inches
Seat Depth: Short Frame - 15-17-inches
Medium Frame - 18-20-inches
Long Frame - 20-22-inches
Back Height: 20 and 24-inches
Wheel Locks: Push-to-Lock (Standard)
Tilt-In-Space: Dual Cable Trigger Mechanism (Standard) - 45° of Tilt
Recliner Back: Dual Cable Trigger Mechanism (Optional) - 0° to 180° of Tilt
Frame: Steel
SPECIFICATIONS
* NOTE: The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts.
If wheelchair is equipped with urethane tires, subtract 1/4-inch from the measurements listed above. All
heights are measured with properly inflated new tires. These heights can vary +1/4-inch due to tire wear.
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS