Filter
Top Products
Solara™ 10 Part No. 1080556 Rev. I
PROCEDURE 1 GENERAL GUIDELINES
STABILITY - ALL MODELS EXCEPT RECLINERS
STABILITY WARNINGS
To maintain maximum stability, position the rear wheels in the most rearward
position in the axle mounting plate. Moving the rear wheels to any of the other
mounting positions causes the wheelchair to decrease in stability.
If moving the rear wheels to ANY forward position, ensure the wheelchair is
stable BEFORE using.
ALWAYS ensure stability BEFORE using maximum amount of tilt-in-space or
moving the rear wheels forward. TEST wheelchair BEFORE it is occupied by
the end user to ensure safety.
GENERAL GUIDELINES
Back Height
Seat Depth
Back Angle
Seating System
Tilt Angle
Caster Size
Caster Position
Wheel Size
Wheel Position
User Condition
Wheel Locks
Anti-Tippers
Locking Collar
NOTE: When changes to the left hand column occur, follow across the chart and refer to the
✓
procedure to maintain the proper stability, safety and handling of the wheelchair.
Back Height ● ✓✓✓✓✓✓✓✓N/A N/A N/A N/A
Seat Depth ✓ ● ✓✓N/A ✓✓✓✓N/A N/A N/A ✓
Back Angle ✓✓● ✓✓✓✓✓✓N/A N/A N/A ✓
Seating System ✓✓✓● ✓✓✓✓✓✓N/A N/A N/A
Tilt Angle N/A N/A ✓ N/A ● N/A N/A N/A N/A N/A N/A N/A ✓
Caster Size ✓ N/A ✓ N/A N/A ● ✓✓✓N/A ✓✓✓
Caster Position ✓ N/A ✓ N/A N/A ✓ ● ✓✓N/A ✓✓✓
Wheel Size ✓ N/A ✓ N/A N/A ✓✓● ✓ N/A ✓✓✓
Wheel Position ✓ N/A ✓ N/A N/A ✓✓✓● N/A ✓✓✓
User Condition ✓✓✓✓✓✓✓✓✓● N/A N/A N/A
Seat Height ✓ N/A ✓✓✓✓✓✓✓N/A ✓✓✓
STABILITY - ALL MODELS
STABILITY WARNING
The back height, seat depth, back angle, seating system, tilt angle, seat height,
size/position of the rear wheels, size/position of the front casters, as well as the
user condition directly relate to the stability of the wheelchair. Any change to
one (1) or any combination of the eleven (11) may cause the wheelchair to
decrease in stability. These adjustments MUST be performed by a qualified
technician.
ALWAYS make sure that the wheelchair is stable BEFORE using the tilt-in-
space.
GENERAL GUIDELINES