Filter
Top Products
Part No. 1080556 Rev. I 69 Solara™
CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT
(FIGURE 8)
BILATERAL CONTRACTURE
1. Remove the mounting screw, two (2) coved washers, washer and locknut that secure the
footplate bracket to the contracture support.
2. Move the footplate bracket UP/DOWN to achieve desired height.
3. Align the mounting hole in the footplate bracket with one (1) of seven (7) mounting holes
on the contracture support.
4. Secure the footplate bracket to the contracture support with the mounting screw, two (2)
coved washers, washer and locknut. Securely tighten.
5. If necessary, repeat STEPS 1-4 on remaining contracture footplate.
CONTRACTURE PLATFORM
1. Loosen, but do not remove the two (2) hex screws and locknuts that secure the contrac-
ture platform to the upper support.
2. Slide the contracture platform to the desired height.
3. Tighten the two (2) hex screws and locknuts that secure the contracture platform to the
upper support.
FIGURE 8 - CONTRACTURE FOOTPLATE HEIGHT ADJUSTMENT
Mounting Screws
Lock Nut
Washers
Footplate
Bracket
Contracture Support
Coved
Washers
Mounting
Holes
CONTRACTURE
FOOTPLATE OPTION
BILATERAL CONTRACTURE
CONTRACTURE PLATFORM
Hex Screws
Locknuts
Contracture
Platform
Upper Support
CONTRACTURE FOOTPLATE
OPTION
PROCEDURE 11
CONTRACTURE FOOTPLATE OPTION