Filter
Top Products
Solara™ 42 Part No. 1080556 Rev. I
BACK/SEAT
FIGURE 5 - INSTALLING/REPLACING SEAT POSITIONING STRAPS
Seat Positioning Strap
Hex Screw
Locknut
Back Plate
Back Cane
Coved Spacers
INSTALLING/REPLACING SEAT POSITIONING STRAPS
(FIGURE 5)
INSTALLING
1. Remove the hex screw and locknut that secures the back cane to the back plate.
2. Position the seat positioning strap against the back plate.
3. Install the hex screw through the seat positioning strap, coved spacers and back cane.
4. Securely tighten the seat positioning strap to the wheelchair with the locknut.
5. Repeat STEPS 1-4 for opposite side.
REPLACING
1. Remove the hex screw, locknut and seat positioning strap from the back plate of the wheelchair
frame.
2. Discard EXISTING seat positioning strap.
3. Install the NEW seat positioning strap to the wheelchair. Refer to
INSTALLING SEAT POSITION-
ING STRAPS in this procedure of the manual.
BACK/SEAT
BACK/SEATPROCEDURE 6