Filter
Top Products
Part No. 1080556 Rev. I 37 Solara™
Socket Screws
Bottom Clamp
Transfer Assist
Side Guard
T-Arm
FIGURE 14 - ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE
GUARDS
ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE
GUARDS (FIGURE 14)
1. Remove the T-arm from the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in
this procedure of the manual.
2. Remove the two (2) socket screws that secure the side guard to the bottom clamp.
NOTE: Adjusting the side guards will directly affect the position of the transfer assist.
3. Perform one (1) of the following:
Small Side Guards - Move the bottom clamp up one (1) of two (2) mounting positions in the side
guard.
Large Side Guards - Move the bottom clamp up one (1) of three (3) mounting positions in the side
guard.
4. Re-secure the side guard to the bottom clamp with the two (2) socket screws.
5. Install the T-arm onto the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in
this procedure of the manual.
ARMS
PROCEDURE 5ARMS
ARMS