Filter
Top Products
Quantum Scale System
Cleaning Instructions 8 - 2
Look At This
Do not dampen labels, electronic parts, or connections. Do
not allow water to enter the openings in the housing. This
could damage the scale system.
Cleaning the Exterior
of Scale
Carefully clean the exterior of the Quantum Scale System
with a clean sponge or cloth and a warm water and
detergent solution (i.e., Palmolive green or Ivory liquid
dishwashing detergents).
Cleaning the Printhead
The Printhead should be cleaned approximately once each
week, or whenever unclear labels are printed. To obtain a
Printhead Cleaning Kit, contact your local Hobart office;
request Part Number 00-184326. Follow the instructions
found in the kit for cleaning the printhead.
Look At This
Do not use a metal tool on the printhead. This could scratch or
break the printhead. In addition, labels should not become
stuck on machine parts. If they do become stuck, remove
the labels at once following the instructions in the Printhead
Cleaning Kit.