Filter
Top Products
Quantum Scale System
Weigh Types (Modes of Operation) 6 - 4
PrePackaged Products
Mode
The PrePackaged Products Mode allows several packages of
the same product to be processed. This mode automatically
prints one label (unless otherwise specified) for each item
being weighed.
Processing Random Weight
PLU’s
QUICK STEPS
From the Start a Run Screen:
1. Enter your Operator ID
2. Enter the PLU Number
3. Place product on platter
4. Enter PLU or PRESS
[HELP]
5. PRESS [ESC]
For Random Weight PLU’s:
1. Enter your Operator ID (if required).
2. Enter the PLU number (Select Flashkey, Type PLU
number or select from the On Screen Library).
3. Place the product on the platter for weighing. A label is
automatically issued. When you remove the product, it
remains on the Run Screen allowing you to process more
packages of the same PLU.
4. You may change the PLU by entering the number in the
Product Number block or PRESS [HELP] to access the
Flashkey Screen or the On Screen Library if Flashkeys are
not configured. (See Note)
5. When finished, PRESS [ESC] to return to the Flashkey
Screen (if configured) or the Start a Run Screen.
☛ Note
♦ From a Flashkey Screen, PRESS [HELP] to access the On
Screen Library.
♦ When working in the PrePackaged Products Mode, you
only have to enter your Operator ID one time. Once the
ID has been entered, multiple products can be processed
without re-entering your Operator ID.