Filter
Top Products
Quantum Scale System
Start a Run Screen 4 - 2
Understanding and
Using the Start a Run
Screen
This section will provide you information on the following:
♦ Overview of the Start a Run Screen, including sections
and keystrokes
♦ Understand the differences between each Weigh Type
on the Start a Run Screen
♦ Understand the differences between each Totals Type on
the Start a Run Screen
♦ Select Weigh and Totals Types
♦ Verify Zero Weight
♦ Rezero the scale if Zero Weight not displayed
♦ Determine if Operator ID’s are required for your system
♦ Overview of the Run Screen, including sections and
keystrokes
♦ Three (3) different ways of entering PLU information
Start a Run Screen
Overview
The Start a Run Screen is divided into several sections:
♦ Date/Time (explained earlier in this manual)
♦ Weight Display
♦ Weigh Types
♦ Totals Types
♦ Operator ID (If enable during Scale Set-up...See Note)
The following lists the keystrokes you can use to move
around on the Start a Run Screen:
♦ To move the cursor use the UP ARROW (▲) and DOWN
ARROW (▼) Keys.
♦ To move the cursor between Weigh type and Total type,
use the LEFT ARROW (
) and RIGHT ARROW ( )
Keys.
♦ The “active” column is shown in Reverse Video (White
letters on a Black field).
PRESS [ENTER] to select the task.